Marney Electric is an AirScape Pro Installer.
Contact us for an estimate for professional installation.

For homes up to 4500 sq. ft. the AirScape 3.0 delivers the high airflow required for larger homes while maintaining the low-noise profile that AirScape is famous for. In fact, this is both our most powerful AND our quietest unit. How is this possible? An exceptionally robust industrial-grade fan, isolated through a noise-deadening ducted design puts the 3.0 in a class all by itself. It’s more expensive to build, and requires a little more energy to run, but the performance—in terms of both airflow and noise—is truly exceptional. Plus, the 3.0 is low-speed-adjustable, straight-forward to install and comes with a hi-flow grill that minimizes noise and looks as unobtrusive as it sounds.

AirScape whole house fans qualify for rebates in a growing number of states and municipalities. Check with your local utility.

Key Features

Exceptionally high power, incredibly low noise

While all AirScape fans deliver high power and low noise, the 3.0 sets new standards in both. The unique ducted design and powerful 18-inch fan work together to raise the bar in terms of performance/noise ratio. The amount of air this unit moves is impressive, and the noise level at which it does this is even more impressive. You really need to feel it and hear it to believe it.

Over-the-top build quality

Again, while exceptional engineering and build quality is a foundational feature of all AirScape units, the 3.0 takes this philosophy a step further, with heavy industrial-grade components that are rare in the consumer market. The shipping weight of this unit is over 80 lbs; the fan alone, with its cast-aluminum motorized impeller, weighs nearly 30 lbs. Every aspect of this unit is built to a rigorous specification suitable to demanding industrial applications.

The AirScape whole house fan has been selected for the San Francisco Sunset Idea Home, one of the first LEED (Leadership in Energy & Environmental Design) certified remodels in the country.

Two-speed operation

On high speed, you get a whopping 3000 CFM to cool your house down fast without sounding like a jet engine. Set to low, the 3.0 runs virtually silent—all you’ll hear is air whooshing quietly through the cube core grill.

Adjustable low-speed setting

Also, the low-speed setting is user-adjustable, so you can tweak it according to your tastes and installation requirements to achieve maximum low-speed flow rates while maintaining near-silent noise levels.

Excellent energy efficiency

At full power, the AirScape 3.0 uses just 360 watts of power, a small fraction of the energy used by an A/C compressor. While the ducted design requires more energy than our other models, the 3.0 is still very efficient. If you are comparison shopping, you’ll see that the 3.0 uses significantly less power than competitive whole house fans in terms of CFM/Watt.

Automatic heavy-duty dampers

A key drawback with traditional whole house fans was air leakage between the attic and living spaces. This could result in dirty attic air entering your home, and, in cold climates, warm, and moist indoor air entering the attic and causing water damage through condensation. Properly installed, the AirScape 3.0 takes care of this problem with an automatic, industrial-quality damper operated by a commercial-grade actuator. When the fan is off, your attic is sealed tight. So attic air NEVER leaks into your living space, and warm air never condenses in your attic.

Premium Cube Core grill

The AirScape 3.0 comes with a premium high-flow grill that minimizes air movement noise through the grill. These high-performance grills look great too, so your system looks as unobtrusive as it sounds.

Maintenance-free operation

The German-engineered sealed motor never requires lubrication. And the only other moving part is the heavy-duty door actuator which is also maintenance-free. All mechanical parts are accessible and can be serviced or replaced without removing the entire unit.

3-year warranty backed by professional support

Not only are the units guaranteed for 3 years, but they’re backed by our professional technical support. If you have a problem with your unit — or just a question — you’ll get prompt, knowledgeable responses from real engineers. Guaranteed.

Wireless remote option
Makes installation even easier with no wiring to run to the switch. Nice to have for convenient operation too!

AirScape 3.0 Specifications

Airflow	3050 actual CFM (max), low speed adjustable
Fan	18-inch, industrial-grade motorized impeller
Energy use	360W (max)
Efficiency	8.5 CFM/Watt (max)
Acoustical	2 Sones (max)
Attic seal	Actuated, industrial-grade aluminum damper
Insulation	R-4 Concerned about R-Values?
Control	Dual SPST Decora switch; optional wireless remote
Grille	Hi-flow, cube-core aluminum (white)
Installation	Drops in between 24” O/C joists (can also accommodate 16 O/C)
Rough opening	22.5” x 22.5”
Req. attic venting	6 sq. ft. net-free
Grille size (outer)	24” x 24”
Damper box size	22” x 22” x 12” (L x W x H)
Unit weight	61 lbs total
Electrical	120 VAC, 60 Hz
Warranty	3 years